ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
і Copyright (c) 1995-1999 VIA Technologies Inc. і
і і
і AGP 4X/133 Bus Master(Ultra DMA) PCI IDE Driver ReadMe.Txt і
і for і
і Win9x/WinNT і
і і
і * This readme file is used to provide the information for і
і installation, Enable/Disable DMA and Uninstall "AGP 4X/133 і
і Bus Master PCI IDE Driver". і
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ
The AGP 4X/133 Bus Master IDE controller is a high performance Bus Master
PCI IDE controller. This "AGP 4X/133 Bus Master PCI IDE Driver" floppy
is used to utilize the DMA operation of your Hard disk/CD-ROMs drives in
order to release the I/O loading from the CPU. You could refer to the
related section to install the driver individually.
CONTENTS
***********************
1) System Requirements
2) Distribution Package Contents
3) Windows 9x Driver
4) Windows NT Driver
5) Package Version Identify
6) Silent Install Driver
7) Verifying Installation of the Driver
8) Notes
1) System Requirements
* This package should be installed on the VIA Bus Master IDE chipset,
VT82C580VP or later, and others' chipset will not be supported.
* The "AGP 4X/133 Bus Master PCI IDE Driver" supports the following
Operation System.
Operation System Version
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Windows 95 4.00.950 or above
Windows 98 4.10.1998
Windows NT 3.51 or above
2) Distribution Package Contents
This distribution floppy is compress by auto uncompressing format. You
could uncompress it by execute it.
The floppy by uncompressing includes these files are listed below.
FLOPPY :
і _INST32I.EX_
і _ISDEL.EXE
і _SETUP.DLL
і _SYS1.CAB
і _USER1.CAB
і DATA.TAG
і DATA1.CAB
і LANG.DAT
і LAYOUT.BIN
і OS.DAT
і README.TXT This file.
і RELEASE.TXT
і SETUP.EXE Install Shield setup main program.
і SETUP.INI
і SETUP.INS
і SETUP.ISS For silent install setup.
і SETUP.LID
і _sys1.hdr
і _user1.hdr
і data1.hdr
і
ГДДДWIN9X
і VIADSK.MPD Windows 9x DMA/PIO device driver file
і VIAIDE.INF Windows 9x ".INF" file
і VIAIDE.VXD Windows 9x VSD driver file
і OEM.REG
і
ГДДДWINNT
і VIADSK.SYS Windows NT 3.51 or above DMA/PIO device driver file
і VIAIDE.INF Windows NT 3.51 or above ".INF" file
і
АДДДDMATool
SETDMA.EXE DMA utility for Windows 9x/NT.
3) Windows 9x Driver
*************************
** Driver Installation **
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the "AGP 4X/133 IDE Bus Master Driver" automatically on your
Windows 9x system.
It will copy the driver to the \WINDOWS\SYSTEM\IOSUBSYS and set the
related registry tree.
************************
** Enable/Disable DMA **
************************
The default setting is the DMA mode. You could turn off the DMA setting
by running the DMATool.
***************************
** Driver Uninstallation **
***************************
You could remove the "AGP 4X/133 Bus Master PCI IDE Driver" by
selecting the "Uninstall" button. It will completely remove the driver
from the sytsem.
4) Windows NT Driver
*************************
** Driver Installation **
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the "AGP 4X/133 IDE Bus Master Driver" automatically on your
Windows NT system.It will copy the driver to the \WINNT\SYSTEM32\DRIVERS
and set the related registry tree.
************************
** Enable/Disable DMA **
************************
The default setting is the DMA mode. You could turn off the DMA setting
by running the DMATool.
***************************
** Driver Uninstallation **
***************************
You could remove the "AGP 4X/133 Bus Master PCI IDE Driver" by select
the "Uninstall" button. It will completely remove the driver from the
sytsem.
5) Package Version Identify
You could check this distribuation version and release date by using
the DATE\TIME displayed by using dir/p command, e.g :
SETUP EXE 59,392 mm-dd-yy hh:mi a SETUP.EXE
The version number reads as 2.hh.mi, which was released on the date of mm/dd/yy.
6) Silent Install Driver
Available parameters: -b, -u, -s
Parameter Description
-b Causes Setup.exe automatically to reboot after
the silent mode install successfully.
-u Uninstall driver. This parameter must works with
the '-s' parameter.
-s Silent install driver.
Note:
- A dash(-) must precede the command line parameters.
- The parameters '-b' and '-u' must be specified before the '-s'
parameter.
Examples:
setup.exe -b -s Silent install driver and reboot the computer.
setup.exe -u -b -s Silent uninstall driver and reboot the computer.
setup.exe -s Silent install driver but not reboot the computer.
setup.exe -u -s Silent uninstall driver but not reboot the computer.
7) Verifying Installation of the Driver
For Windows 9x:
1. Open "Control Panel" from "Start Menu -> Settings".
2. Open "System" in "Control Panel" and select the "Device Manager".
3. Select "Hard disk controllers" and check if the "AGP 4X/133 Bus
Master PCI IDE Controller(Ultra DMA)" controller is existing or
not.
4 If it is then your installation is successful.
For Windows NT:
1. Open "Control Panel" from "Start Menu -> Settings"
2. Select "SCSI Adapters" from "Control Panel".
3. Check the "Devices" is "AGP 4X/133 bus master IDE drivers" or not.
4 If it is then your installation is successful.
8) Notes
* It is recommended to install the CD-ROM which is not on the same
channel with the hard drive for the performance issue.
If you play VCD or DVD abnormally on some CD-ROM or DVD-ROM which
is on the same channel with hard drive, we recommand you to setup
the CD-ROM or DVD-ROM on the separatly channel.
* You should run the ATAPI ZIP 100MB setup program first for the
WinNT 3.51/4.0 in order to use ZIP ATAPI 100MB normally on your
system.
If you run the AGP 4X/133 Bus Master setup program first and then
the ATAPI ZIP 100MB setup program. After the ATAPI ZIP 100MB setup
program, it will disable the AGP 4x/133 Bus Master driver after the
installation.You could use the following steps to disable the ATAPI
ZIP 100MB driver and enable the AGP 4X/133 Bus Master driver again.
1. Double click the "Devices" icon from Control Panel.
2. Select the service for IDE/ATAPI ZIP drive. (ex. imgatapi)
3. Press the "Startup" button and select "Disabled".
4. Press "OK" and reboot computer.