Remote Control  (490-0850)     Mounting the Siren       Faxback Doc. # 8953
Alarm System

To mount the siren, do the following:

 1.  Select a location on the interior wall of the engine compartment for
     mounting the siren.  Do not choose a location where you might drill
     into your vehicle's wiring or suspension system.

Note:  Mount the siren where it will not be subjected to water or extreme
       heat.

 2.  If necessary, start the screw holes by drilling three 1/8-inch pilot
     holes into the mounting surface.  Use the siren's mounting bracket
     as a guide.

 3.  Secure the siren by inserting the supplied screws through the siren's
     mounting bracket.

(SMC/jlc-03/22/94)