Model 96  (160-0534)        Inputs and Outputs         Faxback Doc. # 7874

The CH.3/4 switch and the TV/VCR and TU/AV buttons control the input
and output signals of your VCR.  This section explains how to select the
channels your view and record.

SETTING THE CH.3/4 SWITCH

Set the VCR's CH.3/4 switch (on the back of the VCR) to 3 or 4, whichever
is not an active channel in your area.

When VCR appears on the display, the VCR sends the selected video source
from its OUT TO TV terminal to the TV.

The CH.3/4 switch has no effect on the TV when the VCR is off, when VCR
does not appear on the display, or if you are using a TV which has
separate audio/video input jacks and which is set to the TV mode.

USING THE TV/VCR BUTTON

The Model 96's 181-channel (68 VHF/UHF channels, 113 cable channels) tuner
is active anytime you turn it on.

Press TV/VCR on the remote control so VCR appears on the display, and you
can then use the VCR's tuner to select the channel you view.

To select a channel with the TV's tuner, press TV/VCR so VCR does not show
and set the TV to the TV mode.

Whenever the VCR is on, the signals from the VCR are sent to the
AUDIO/VIDEO OUT jacks, regardless of the TV/VCR setting.

USING THE TU/AV BUTTON

To choose a signal to record, press TU/AV on the remote control until the
desired indication appears in the display window: a channel number for
recording VHF/UHF signals, or AV for recording signals from the VCR's
AUDIO/VIDEO IN jacks.

NOTE:  The TU/AV button has no effect during tape playback or when the VCR
       is turned off.

(ALL-10/31/94)