Stereo Cassette  (120-1998)         Memory              Faxback Doc. # 6930
 
Storing Stations

You can store up to 12 AM and 18 FM stations in memory.  You can then
select a stored station by pressing the correct memory location button.

1.  Press BAND to select the desired band.

2.  Use either of the tuning methods to tune to the station you want to
    store.

3.  Press and hold the desired memory location button for about 2 seconds
    until it sounds a beep.

The band number, the frequency, and the memory location number appear on
the display to show that the station is stored.

Automatically Storing Stations

You can let the stereo automatically store stations.  You can then select
a stored station by pressing the correct memory location button.

1.  Press BAND to select the desired band (AM1, AM2, FM1, FM2, or FM3).

2.  Use either of the tuning methods to tune to the frequency just before
    the first station you want to store.

3.  Press and hold down AMS for about 3 seconds.  The stereo scans the
    selected band, then, after about 2 seconds, automatically stores the
    first six stations it finds.  The stereo beeps as it stores the first
    and last stations.

    The band number, the frequency, and the memory location number appear
    on the display.

4.  Press AMS when the stereo has stored the six stations.

Note:  If you do not press AMS, the stereo will scan the band again and
       tune to each stored station for about 5 seconds.

Selecting a Stored Station

To select a stored station, simply press the desired memory location
button.  To scan stations you already stored press AMS.

USING THE CASSETTE PLAYER

Warning:  To prevent hearing damage, always turn the volume to its lowest
          level before you begin listening to a tape.

Note:  Avoid using C-120 cassette tapes.  They are very thin and easily
       become tangled in the tape-handling parts.

Follow these steps to play a cassette tape.

1.  Take up any slack by turning the cassette's hub with your finger or a
    pencil.

    Avoid touching the tape.

2.  Insert the tape into the cassette compartment with its open edge to
    the right and the side you want to hear facing up.  The tape begins to
    play.

3.  Adjust ON/VOL, BASS, TREBLE, and BAL to suit your listening
    preferences.

4.  Press the eject button halfway to fast-forward the tape.  To stop
    fast-forward, gently press the eject button again.

5.  Push the eject button all the way to stop the tape and eject the
    cassette.


(smm 03/07/94)