9600 BPS Faxmodem  (250-3029)        Features          Faxback Doc. # 5220

* 100% Hayes AT Command Set Compatible, with Extended MNP 5 and V.42 bis
  Command Set
* 14400/12000/9600/7200/4800/2400/1200/300 bps Data Pump
* 14400/12000/9600/7200/4800/2400 Group III Fax
* Asynchronous and Synchronous Operation
* 20 MHz Controller and V.32bis Data Pump on board
* Automatic Adaptive Equalization
* Automatic Speed Sensing-automatically adjusts to calling modem
* V.42bis and MNP 5 data compression
* V.42 compliant error correction (LAPM and MNP)
* V.17 protocol for 14,400 bps fax capability
* Supports Class 1 (EIA/TIA 578) and Class 2 (EIA/TIA 592) fax
* Auto-negotiation of highest level or correction, compression and modem 
  speed-V.42bis, MNP 2.5, V.42, MNP 2-4 at 14400/12000/9600/7200/4800/2400/ 
  1200 or 300 bps
* High-speed 16550 UART with 16-byte bi-directional buffer for faster data
  through put
* Ability to manually force MNP 4, V.42, MNP 2.5, or V.42bis
* Auto-dial/Auto-answer
* Tone and Pulse Dialing--software switchable
* Adaptive Dialing (auto-sense DTMF service)
* Call Progress Tone Decoding--busy, ring, dialtone
* Line quality monitor and retrain capability
* Phone Directory (four 36-digit numbers stored in non-volatile memory)
* Dual RJ11 PHone Jacks-one for phoneline, one for optional phone
* Audio Speaker with software volume control
* Non-volatile Configuration Storage in NVRam
* Automatic Gain Control
* Automatic Self-Diagnostics
* Digital and Analog Loop Diagnostics
* Automatic terminal to modem speed sensing between 50 and 57,600 bps in
  asynchronous operation
* Speed Buffering Flow Control
* Direct Mode Option (passthrough data path)
* Inactivity Timer--when set, causes hang up if no data for programmable 
  time (1-42 minutes)
* Satisfies requirements for operation in Japan (jumper selectable)
* Extensive communication software compatibility

(dtc-07/29/93)