Infrasonic Alarm  (490-0825)   Setting Security Code   Faxback Doc. # 8931

The alarm system lets you set your own security code.  This prevents
others with alarm systems that operate on the same frequency from arming
or disarming your system from a remote location.

To set the security code:

1.  Remove the transmitter's cover.

2.  Set the transmitter's four position dip switch to any combination of
    ON and OFF.

Note:  If you change the transmitter's security code or if you use a new
       transmitter to replace one you lost, you must reinitialize the
       alarm receiver by disconnecting the receiver's power for about
       1 minute.

(smc-03/02/94)