TAD-517  (430-0756)     Setting the Security Code      Faxback Doc. # 6248

To program the security code you want, follow the steps shown in the
action column next to that security code.

 Security Code         Action

     0                 Connect AC power without pressing any button

     1                 Press and hold ANNOUNCE, then connect AC
                       power

     2                 Press and hold PLAY/FAST-F, then connect AC
                       power

     4                 Press and hold MEMO/REWIND, then connect AC
                       power

     5                 Press and hold STOP/ERASE, then connect AC
                       power

     7                 Press and hold ANSWER, then connect AC power


 NOTES:  Once the security code is programmed, buttons 1, 4, 7, and
         * all activate the same code.  Buttons 2, 5, 8, and 0 all
         activate the same code.

         Buttons 3, 6, 9, and # are not used as security codes.

         After you complete each of the above actions, the TAD beeps
         to confirm the setting is completed.

         To change the security code, disconnect AC power and proceed 
         as stated above.

(CJD/smc-05/09/94)