MC-1 Mouse Pak  (260-0346)        Mouse Driver        Faxback Doc. # 5740

The supplied mouse driver software lets your mouse operate with standard
MS-DOS software.  If you have a hard disk, we recommend you copy the
driver from the supplied diskette onto your hard disk and edit your
AUTOEXEC.BAT file to include the command to load the drive.  See your
MS-DOS reference guide for instructions on copying files and modifying
your AUTOEXEC.BAT file.

To manually load the drive, or to change one of the drive options, type:

         TMOUSE [/OPTION]...

You can enter any of the following options:

?       Displays the list of available options.

C1      Sets the driver to operate with serial port COM 1.

C2      Sets the driver to operate with serial port COM 2.

D       Enables the dynamic speed feature.  (Moving the mouse slowly give
        high resolution, while moving it quickly give a lower resolution).

L       Reserves the functions of the left and right mouse buttons.

R0      Sets the resolution to 5X. (The cursor moves in very small
        increments).

R1      Sets the resolution to 1X.  (The default.  The cursor moves about
        the same distance the mouse moves).

R2      Sets the resolution to 2X.  (The cursor moves about twice the
        distance the mouse moves).

R3      Sets the resolution to 4X.  (The cursor moves about four times the
        distance the mouse moves).

Q       Unloads the mouse driver from memory.

USING THE MOUSE WITH MICROSOFT WINDOWS

To use the mouse with Windows, follow the instructions that come with
Windows to select the Microsoft or IBM PS/2 mouse driver if you set the
switch to MS, or the Mouse Systems serial or bus mouse if you set the
switch to PC.

(smc-12/07/93)