FaxMate  (250-3063)         DeskMate Usage             Faxback Doc. # 5390

Installing

1.  Use F7 Install to install FaxMate software.
2.  Use F2 Run to run the CFAX program.
    Select F7 Special Features and then F7 Fax Configuration, confirm that
    all settings are as you want them.  Be sure to select your preference for
    Automatic Cover Sheet.  If you have FaxMate automatically send a cover
    sheet, press F3 to setup the default cover sheet.  Press F10, F10, ESC,
    ESC to return to Deskmate.
3.  Use F10 Setup and select the IBM Graphics printer.  You MUST use this
    printer driver when you want to send a FAX through Deskmate.

To Send a Fax
1.  Select FAXMATE from the DeskMate DeskTop.  When you complete the form
    press <ENTER>.
2.  Be sure you have selected the IBM Graphics printer under F10 Setup.
3.  Use your Deskmate application to prepare the document you want to send.
    Then print the document.  The document does not print; FaxMate captures
    the print output and uses it to create the fax.
4.  Return to the DeskMate DeskTop.
5.  Select FAXMATE again.  Note that this time the OK at the bottom has been
    replaced by SEND.  If all the information is correct, press <ENTER>.  You
    return to the DeskMate DeskTop and FaxMate begins converting and sending
    the fax.

To Receive a Fax
If you have a dedicated fax phone number ,FaxMate answers the telephone and
receives faxes automatically without your have to do anything.

If you share a voice and fax line, and you receive a fax call or want to
switch from a voice call to receive a fax:
1.  Exit DeskMate.
2.  At the DOS prompt, press your CFAX HotKey (ALT+F).
3.  Press F2 to begin receiving the fax.

(css 08/02/93)