************************************************************
************************************************************
*
* Intel(R) 810 Chipset Driver for Windows NT4.0
* Installation Read Me
*
* Date: June 23, 1999
*
* NOTE: This document refers to systems containing the
* following Intel chipset:
* Intel(R) 810 Chipset
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information can be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. System Requirements
2. Localized Language Abbreviations
3. Installing the Software
4. Verifying Installation of the Software
5. De-installing the Software
6. Identifying the Software Version Number
************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel(R) 810 Chipset GMCH A-2
2. It is recommended that the kit software is installed on
systems with at least 64MB of system memory.
3. It is recommended that there is sufficient hard disk
space in the <TEMP> directory typically)
C:\TEMP) on the system to install this software.
The Windows NT INF files included with this distribution
package are designed to function with the following
versions of Windows NT:
Microsoft *Windows NT 4.0 4.00.1381 (With Service Pak 4)
Please check with your system provider to determine which
operating system and Intel chipset are used in your system.
************************************************************
* 2. Localized Language Abbreviations
************************************************************
The following list is the abbreviations of all languages that
the driver has been localized in. You may have to reference
this section while using this document.
ptb -> Brazilian Portuguese
dan -> Danish
nld -> Dutch
eng -> English
fin -> Finnish
fra -> French
frc -> French Canadian
deu -> German
ita -> Italian
enu -> International English
jpn -> Japanese
kor -> Korean
chs -> Mainland Chinese
plk -> Polish
ptg -> Portuguese
cht -> Traditional Chinese
nor -> Norwegian
rus -> Russian
esn -> Spanish
esm -> Spanish Mexican
sve -> Swedish
tha -> Thai
esp -> Traditional Spanish
************************************************************
* 3. INSTALLING THE SOFTWARE
************************************************************
General Installation Notes:
1. This installation procedure is specific only to the
version of driver and installation file included in this
release.
2. This installation procedure is specific only to the
version of driver and installation file included in this
release.
1.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM HARD DRIVE
1. Download the graphics zip file from the web. Doubleclick to unzip
(you must have Winzip installed, download from www.winzip.com).
Hit the "Extract" button and indicate which directory you wish
to extract the files to. Hit the "Extract" button to unzip
the files to that directory.
2. Enter the directory where you unzipped the zip file
and doubleclick SETUP.EXE.
3. Click "Next" at the Welcome screen.
4. Read the license agreement and click "Yes" to continue.
5. This screen indicates the directory where the End User
Diagnostic Utility files will be stored. NOTE: the graphics
driver is not installed here (it is installed in the appropriate
Windows system directories), just the EUD utility files. If you
wish to change the directory where the EUD will be stored, click
"Browse" and change the directory. Click "Next" to continue.
6. The driver files will now be installed. When finished installing,
choose the "Yes" to reboot option and click "Finish" to restart your
computer. The driver should now be loaded. To determine if the driver
has been loaded correctly, refer to the "Verifying Installation"
section below.
************************************************************
* 4. Verifying the Installation of the Software
************************************************************
1. Select "My Computer" icon, "Control Panel" icon, and
then the "Display" icon.
2. You should now be in the "Display Properties" window.
Select the "Settings" tab, and click on the "Display Type"
button.
3. You should be in the "Display Type" window. The
appropriate version number should be listed. If this is not
the case, then a different driver is being used.
************************************************************
* 5. DE-INSTALLING THE SOFTWARE
************************************************************
Note that this procedure assumes the above installation
process was successful.
This de-installation procedure is specific only to the
version of the driver and installation file included in this
package.
1. From the Windows NT desktop, click on "My Computer",
then "Control Panel", and then, finally, "Display".
2. You should be in the "Display Properties" window. Click
on the "Settings" tab, then the "Display Type" button.
3. The display type page should appear. Now select the
"Change..." button.
4. The Change Display page will appear, In the split window
under "Manufacturers" select "Standard display type". In
the other window select "VGA compatible display adapter".
Now select "OK".
5. The "files needed" screen should appear. If needed,
point to the location of the NT install CDROM location and
click "OK".
6. The "installing drivers" page should appear stating that
"The drivers were successfully installed". Click "OK". Click
"Close" in the Display driver screen then "Close" in "Display
Properties".
7. When prompted, re-boot the system as directed in order
for the changes to take effect.
************************************************************
* 6. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1. Select "My Computer" icon, "Control Panel" icon, and
then the "Display" icon.
2. You should now be in the "Display Properties" window.
Select the "Settings" tab, and click on the "Display Type"
button.
3. You should be in the "Display Type" window. The
appropriate version number should be listed. If this is not
the case, then a different driver is being used.
************************************************************
* 7. INSTALLATION SWITCHES AVAILABLE
************************************************************
The installation program executable is to be named SETUP.EXE
and will have the following syntax. Switches are not case
sensitive and may be specified in any order (except for the
-s switch). Switches must be separated by spaces.
SETUP [-b] [-no{pp}] [-basic] [-g{xx[x]}] [-nomsg]
[-16x640x480][-nolic] [-s]
-b Forces a system reboot after the installation
completes.
-no{pp} Disables the specified Intel-designed property
pages.
{pp} is one of the following:
{pp} Description
clr Removes the color property page from the Display
Properties sheet
tvout Removes the TV-Out property page from the Display
Properties sheet
fp Removes the Flat Panel property page from the
Display Properties sheet
ver Removes the Version property page from the Display
Properties sheet
display Removes the Display property page from the Display
Properties sheet
diag Removes the end-user diagnostic button found on the
Version tab
-basic Removes all Intel-designed property pages/features
from the Display Properties sheet. This switch
overrides all -no{pp} switch settings.
-g{xx[x]} Forces the installation to install a
particular language version of the driver.
The messages displayed to the user are also
displayed in the language specified. If
the language version of the operating system
on which the installation is being run
doesnÆt support the specified language,
the displayed messages may be garbage text.
{xx[x]} is one of the following:
{xx[x]} Language
CHS or CH Chinese (Simplified)
CHT or TW Chinese (Traditional)
DAN or DK Danish
DEU or GR German
ENG English (UK)
ENU or US English (US)
ESM Spanish (Mexican)
ESN or SP Spanish (Modern)
ESP Spanish (Traditional)
FIN or FI Finnish
FRA or FR French (Standard)
FRC French (Canadian)
ITA or IT Italian
JPN or JP Japanese
KOR or KR Korean
NLD or NL Dutch
NOR or NO Norwegian (Bokmal)
PLK or PL Polish
PTB or BR Portuguese (Brazilian)
PTG or PT Portuguese
RUS or RU Russian
SVE or SE Swedish
THA or TH Thai
-nomsg Suppresses the displaying of non-critical messages.
During the file-copy process when installing the
driver (not the EUD), the installation program may
come across earlier or later versions of system files.
The install will never replace newer versions of these
files. It may replace older versions of files. If
the older file is not read-only, it will be replaced.
When the older file is read-only, this switch
instructs the install to not prompt the user for
confirmation to over write the older file. In this
case it will always overwrite the older file. If the
switch is not specified, the user will be prompted to
confirm overwriting the older file. This flag has no
affect on the installation of system files required by
the EUD.
-nolic Suppresses the display of the license agreement screen.
--<color depth>x<horizontal resolution>x<vertical resolution>x
<refresh rate>
Sets the default display mode. If no display mode switch
is specified, the display mode will be set to 16x800x600.
Example: -8x640x480x70 will set the color palette to 256
colors (8-bit color depth), the desktop resolution to
640x480, and the refresh frequency to 70 hertz. If no
display mode switch is specified, the display mode will
be set to 16x800x600x60.
-s Run in blind mode. In blind mode all visual indication
that the installation is taking place is disabled. In
blind mode the installation requires no user
interaction and all selections which normally require
user input will use the default selections. This switch
must be the last switch specified on the command line.
Specifying Default Switches
Default switches may be specified by modifying the
SETUP.INI and INSTALL.CFG files. When the install
program is invoked it first reads the SETUP.INI file to
see if the blind mode switch is specified. If it is, the
install program will always run in blind mode regardless
of what switches are specified in the INSTALL.CFG file
and on the invocation command line. After reading the
SETUP.INI file it checks to see if other switches apply.
If switches were specified on the command line, it
ignores any switches specified in the INSTALL.CFG file
and uses only those specified on the command line. If
no switches were specified on the command line, it reads
the INSTALL.CFG file and uses switches specified in that
file.
SETUP.INI Switches
The only switch that may be specified in the SETUP.INI
file is the blind mode switch (-s). No other switches may
be specified in this file. All other switches should be
specified in the INSTALL.CFG file. The blind mode switch
is added to the CmdLine line of the [Startup] section as
follows:
[Startup]
CmdLine=-s
INSTALL.CFG Switches
All switches except for the blind mode switch (-s) may be
specified in the INSTALL.CFG file. They should be added
to the CmdLine line in the [Configuration] section
following the format specified in the Command Line
Syntax section above. An example INSTALL.CFG file is
should below:
[Configuration]
CmdLine=-16x640x480 -b -notvout
Example Invocation Syntax
SETUP -s
SETUP -b
SETUP -gus -b -s
SETUP -gGR
SETUP -basic -gNOR
SETUP -notvout -s
SETUP -16x640x480 -b -s
*************************************************************
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you do
not wish to so agree, do not install or use the Software.
LICENSE. You may copy the Software onto a single computer for
your personal, noncommercial use, and you may make one back-up
copy of the Software, subject to these conditions:
1. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in this
Agreement, and you agree to prevent unauthorized copying of
the Software.
2. You may not reverse engineer, decompile, or disassemble
the Software.
3. You may not sublicense or permit simultaneous use of the
Software by more than one user.
4. The Software may include portions offered on terms in
addition to those set out here, as set out in a license
accompanying those portions.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but is
not obligated to support or update the Software. Except as
otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks,
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items
contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROF-ITS, BUSINESS INTERRUPTION,
OR LOST INFORMATION) ARISING OUT OF THE USE OF OR IN-ABILITY
TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITA-TION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with
"RESTRICTED RIGHTS." Use, duplication, or disclosure by the
Government is subject to restrictions as set forth in
FAR52.227-14 and DFAR252.227-7013 et seq. or its successor.
Use of the Software by the Government constitutes
acknowledgement of Intel's proprietary rights therein.
Contractor or Manufacturer is Intel Corporation, 2200
Mission College Blvd., Santa Clara, CA, USA 95052-8119.
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or
warranty.
The INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted
by this document. Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products including
liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, life saving,
or life sustaining applications.
************************************************************
Intel Corporation disclaims all warranties and liabilities
for the use of this document and the information contained
herein, and assumes no responsibility for any errors which
may appear in this document, nor does Intel make a
commitment to update the information contained herein. Intel
reserves the right to make changes to this document at any
time, without notice.
************************************************************
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1998-1999