Template for the RESCODE program
--------------------------------

If you are using the RESCODE program and need to identify several resitors 
quickly, the following template can be made to place over the keys.
Then, pressing the keys through the template using the resistor colour code makes it easier and quicker to identify resistors.

1) Cut a piece of paper 1.5cm wide and about 40cm long and centre it over    
   the second line of the keyboard (the QWERTYUIOP line).
2) Mark on the paper between the keys Q to P.
3) Draw lines vertically on the paper using these marks.
4) Colour in the resulting squares in the following order :
   
   Q - Black    W - Brown    E - Red      R - Orange   T - Yellow

   Y - Green    U - Blue     I - Violet   O - Grey     P - White

5) Fix the template to the keyboard by wrapping the ends of the paper around    
   the computer and fixing with sello-tape.


st702@gre.ac.uk 5/11/97